cement & Concrete Testing Equipment
Blain Air Permeability Test Apparatus
Read moreAs per IS:4031(Part 2) and IS 5516. The apparatus comprises of Standard permeability cell made of brass, 12.7 mm inside diameter with one perforated metal disc and one plunger, A U-Tube glass manometer with rubber coupling for permeability cell, mounted on a wooden stand,, Latex rubber tubing, 30 cm long, 100 ml Dibutylphthalate liquid, Suction Bulb. Additional Instruments for the complete experiment Viz. Filter Paper discs, Precision Electronic balance(1 mg), Standard Cement, stop watch etc. available at extra cost.
Cement Permeability Apparatus
Read moreGlobetrek Cement Water Permeability Apparatus, as per IS: 1727, 2645. Permeability test on pozzolona cement mortar and cement mortar with or without the addition of integral water proofing compound is carried out using a Brass cell of 100mm dia and 50mm high. Each cell with a collar is clamped in between a base plate and top plate with the help of tension rods & nuts. The top plate is provided with an inlet and air release vent and the base plate is provided with an outlet. Six Cell Model without air compressor.
Concrete Cube Mould with ISI Mark
Read moreGlobeTrek Engineering Corporation is a Trusted Manufacturer, Supplier & Exporter of Concrete Cube Mould AS per IS , BS , AASHTO , ASTM & EN Standard from IndiaCubes of fresh concrete are made to test a variety of properties on the eventually cured and hardened concrete. Fresh concrete is subjected to a standard compaction regime in the cube mould and is then normally initially cured under specific laboratory conditions. The moulds are
manufactured, subject to tight dimensional, hardness, squareness and surface finish requirements.
Concrete Testing Equipment
Read moreGlobetrek Engineering Corporation offers range of concrete testing equipment’s satisfies all IS , BS , EN, ASTM and other National Standards. A wide selection of accessories and upgrading options makes our concrete testing solutions flexible and modular allowing each user to expand their testing capabilities easily and as required, from basic Quality Control to Advanced Testing. Our products are complemented by a wide range of equipment for fresh and hardened concrete testing plus Non-Destructive Testing (NDT).
Top 3 Basic equipment to start Concrete Testing Laboratory
Read moreAs per the Reference to above blog we have notice that products manufacturer by us are not just highly demanded in the market but also Necessary to start any construction project.
First item cube moulds comes in Two Type of Quality ISI and Non ISI Mark . For more details you can click here
Here they have well explain the difference between ISI and NON ISI Mark Cube Mould.
Our Slump Cones are well describe by this blog https://civilengineeringequipmentsknowledge.blogspot.com/2023/03/concrete-testing-slump-cone-apparatus.html
For Any Information Call Us
